One unit 20/40' ENJUE automatic container spreader. It includes 4 steel wire ropes, which have rigging rings at the end of the steel wire ropes. The ends that connect with the crane have a concentrated
Surface Treatment & Painting
Technical Documents
When delivering, the seller provides:
drawings of the spreader& quick-wear parts
Operation Manual
Certificate of Quality
Parts Introduction
1. Lever For Operating Rope
2. 20'&40'Heavy Duty Container Spreaders 20'&40'
3. Semi-Automatic or Manual Operation
4. Extra Large Lifting Rings 180*340mm 180*340mm
5. Actuation Spring
6. Spring Support
7. Operating Handle
8. Twist lock
9. Actuation Gear For Automatic Operation
Spreader Characteristics
1. The spreader adopts box-type end beam, so the structure is stable. The twist lock is leak proof structure, which protects the parts from rusting
2.Four hoist points structure, which lighten the dead weight of the spreader, and enhance the stability of the spreader.
HS20'/ HS40'HS20'/ HS40' spreader adopt Heavy hammer type semi-automatic twist lock, manpower to turn the pin is no need any more, which highly improve the work efficiency and safety on spot
Safety Test
1. 150%Each spreader should be carried out 150% static load test before delivering.
2. All the lifting eyes should be carried out safety test.
3. 25
Each twist lock should be carried out 25t safety test.
Safety Protection
1. When the spreader lifts container, the load should not exceed the max. SWL.
2. When using the spreader, using design function only.
3.Person shouldn't stand under the lifting spreader.
After operation, please check if there are damages on the spreader, if fasteners loose. If so, please repair timely.
Repair and Maintenance
Twist lock
Each twist lock should be lubricated (Grease ZG-3), lubricate the spreader half a year.
2Hinge point of the connecting rod should be lubricated frequently.
3. After operation, please check if there are damages on the twist lock.
Bearing block of the connecting rod should be lubricated frequently.
After 50 hours' and 250 hours' operation, all the fasteners should be fastened again, and all the lubricating parts should be lubricated.
2. 1001500
After 100 hours' operation or lifting 1500 containers, check if all the screws and fasteners are fastened. If loose, please fasten again.
3. 100015000
After 1000 hours' operation or lifting 15000 containers, all the lubricating parts should be lubricated.
4. 150025000.
After 1500 hours' operation or lifting 25000 containers, the twist lock structure should be checked.
a)
Disassemble all the four twist lock structures.
b)
If any problem, please replaced accordingly.
c)
Washing all the parts.
d)
Install the four twist lock structures.
5.300050000
After 3000 hours' operation or lifting 50000 containers, the twist lock structure should be checked, if there are cracks or other faults, please replace timely.
100000 After 6000 hours' operation or lifting 100000 containers, please replace the twist
lock structure.
Audited Supplier 
){kind=link}