Over height container lifting beam
This kind container lifting beam is designed for the handling of 20feet/40feet ISO flat rack with single or double hook jib cranes, in ports or on vessels.
The twistlocks are activated by landing and lifting the spreader,from the container by the crane operator.
Parts Introduction
1). Lever For Operating Rope
2). 20'&40'Heavy Duty Container Spreaders
3). Semi-Automatic or Manual Operation
4). Extra Large Lifting Rings 180*340mm 180*340mm
5). Actuation Spring
6). Spring Support
7). Operating Handle
8). Twist lock
9). Actuation Gear For Semi-Automatic Operation
Features:
1. No hydraulic or electric systems are needed.
2. Low maintain cost
3. High work performance.
4. Fixed type/telescopic type (options).
5. Automatic hook type/Manual operated (options).
6. The structure is firm and reliable.
Safety Test
1). Each spreader should be carried out 150% static load test before delivering.
2). All the lifting eyes should be carried out safety test.
3). Each twist lock should be carried out 25t safety test.
Safety Protection
1).When the spreader lifts container, the load should not exceed the max. SWL.
2).When using the spreader, using design function only.
3). Person shouldn't stand under the lifting spreader.
4). After operation, please check if there are damages on the spreader, if fasteners
loose. If so, please repair timely.
Repair and Maintenance
1).Twist lock
a. Each twist lock should be lubricated (Grease
ZG-3), lubricate the spreader half a year.
b. Hinge point of the connecting rod should be lubricated frequently.
c. After operation, please check if there are damages on the twist lock.
2). Bearing block of the connecting rod should be lubricated frequently.
(1). After 50 hours' and 250 hours' operation, all the fasteners should be fastened again,
and all the lubricating parts should be lubricated.
(2). After 100 hours' operation or lifting 1500 containers, check if all the screws and
fasteners are fastened. If loose, please fasten again.
(3). After 1000 hours' operation or lifting 15000 containers, all the lubricating parts
should be lubricated.
(4). After 1500 hours' operation or lifting 25000 containers, the twist lock structure
should be checked.
a). Disassemble all the four twist lock structures.
b). If any problem, please replaced accordingly.
c). Washing all the parts.
d). Install the four twist lock structures.
(5). After 3000 hours' operation or lifting 50000 containers, the twist lock structure
should be checked, if there are cracks or other faults, please replace timely.
(6).After 6000 hours' operation or lifting 100000 containers, please replace the
twist lock structure.
Our advantage
1. Enjue can customize various non-standard lifting beams and frames according to different customer needs.
Through these frames and lifting beams, cranes that were originally not suitable for single-hook remote-control grab buckets
and hydraulic grab buckets can beequipped with single-hook grab buckets for use.
Alternatively, they can be used for lifting large equipment and bulk goods.
2. Enjue accepts OEM and ODM orders.
3. Enjue provides one-stop service.
4. CE/ISO Standard.
5. Customizable.
Our Services:
Act as a good adviser and assistant of client, we can help them to get rich and generous returns on their investment.
1.Pre-sale services:
a: Design customised project for clients.
b: Design and manufcture products according to clients special requirement.
c: Train technical personnel for clients.
2.Services during the sale:
a: Help clients to find reasonable freight forwarders ahead of delivery.
b: Help clients to draw solving plans.
3.After-sale services:
a: Assist clients to prepare for the construction scheme.
b: Install and debug equipment.
c: Train the first-lin operators.
d: Examine equipment.
e: Take initiative to eliminate the troubles immediately.
f: Provide techical exchanging.
Before you send us an inquiry about container spreader, please let us know some information as following:
1:What is lifting capacity of spreader?
What is type of spreader? Semi automatic container spreader, New I type spreader, motor spreader, hydraulic telescopic spreader or electro telescopic spreader?
2:If what you need is telescopic spreader, please confirm it is hydraulic telescopic or electric telescopic?
3:What is the using temperature of spreader?
4:Will you match a rotator with the telescopic spreader?
Audited Supplier 
){kind=link}