Enjue 40t Electric Hydraulic Telescopic Rotating Container Spreaders
Rotating spreader is specially designed for bridge cranes, floating cranes, and gantry cranes. It is suitable for loading and unloading of ISO standard 20ft and 40ft containers with a rated lifting weight of 40 tons.Accept non-standard customization.
Parts
1. Lever For Operating Rope
2. 20'&40'Heavy Duty Container Spreaders
3. Semi-Automatic or Manual Operation
4. Extra Large Lifting Rings 180*340mm 180*340mm
5. Actuation Spring
6. Spring Support
7. Operating Handle
8. Twist lock
9. Actuation Gear For Semi-Automatic Operation
Features
Rotary hydraulic spreader is driven by hydraulic system, it is a kind of container spreader with high automation degree and working efficiency, it has the function of rotating the container orientation by itself, especially suitable for the occasions that need to rotate the container and have higher requirements on loading and unloading speed.
1. The spreader adopts box-type end beam, so the structure is stable. The twist lock is leak proof structure, which protects the parts from rusting.
2. Four hoist points structure, which lighten the dead weight of the spreader, and enhance the stability of the spreader.
3. HS20'/ HS40' spreader adopt Heavy hammer type semi-automatic twist lock, manpower to turn the pin is no need any more, which highly improve the work efficiency and safety on spot.
Design drawings
Technical data
| Item |
20' |
40' |
| Rated SWL |
25-35T |
32-45T |
| Max. SWL |
40T |
50T |
| Dead Weight |
1.2-2.6T |
1.2-2.6T |
| Distance between lock centers(length) |
≈ 5853 mm |
≈11985 mm |
| Distance between lock centers(width) |
≈ 2260 mm |
≈2260 mm |
| Overall Length |
≈ 6058 mm |
≈12188 mm |
| Overall Width |
≈ 2610 mm |
≈2610 mm |
| Frame Height |
≈ 636 mm |
≈731 mm |
| Dia. of pressed wire rope slings |
32 mm |
36 mm |
| Length of pressed wire rope slings |
3.5m per piece
(4 pieces for each set) |
8.5m per piece
(4 pieces for each set) |
| Steel Frame |
Material Q345B |
Material Q345B |
Operation
1. Firstly place the four main lifting cables and one swivel tensioning cable of the spreader into the hook of the gantry crane.
2. Before lifting, ensure that the guide rails are in the open position. Lock the four corners of the spreader using the locators on all four sides of the spreader and skilful handling, then slowly activate the hook.
3. Tighten the wire rope to tighten the swivel mechanism, rotate the swivel lock 90° and close it, then continue to lift the hook.
4. After lifting the container to the intended position, hold the hook for approx. 1-2 metres and lift the hook again. 5.
5. Before pulling the main lifting cable, lift the swivel cable so that the swivel lock returns to the open position, then lift the hook so that the spreader and container are out of the way. The operation is now complete.
Surface Treatment & Painting
1. Flame dirt-remover, and then shot blasting.
2. Primer coating (Epoxy resin paint) app. 40µm
Middle (Epoxy resin paint) app. 80µm
Top paint (Polyurethane paint) app. 40µm.
3. The top coat paint color is yellow. There is scutcheon with the main specifications, manufacture date and
exfactory number.
Safety Protection
1. When the spreader lifts container, the load should not exceed the max. SWL.
2. When using the spreader, using design function only.
3. Person shouldn't stand under the lifting spreader.
4. After operation, please check if there are damages on the spreader, if fasteners loose. If so, please repair timely.
Safety Test
1. Each spreader should be carried out 150% static load test before delivering.
2. All the lifting eyes should be carried out safety test.
3. Each twist lock should be carried out 25t safety test.
Repair and Maintenance
1.Twist lock
1). Each twist lock should be lubricated (Grease ZG-3), lubricate the spreader half a year.
2). Hinge point of the connecting rod should be lubricated frequently.
3). After operation, please check if there are damages on the twist lock.
2.Bearing block of the connecting rod should be lubricated frequently.
1). After 50 hours' and 250 hours' operation, all the fasteners should be fastened again, and all the lubricating
parts should be lubricated.
2). After 100 hours' operation or lifting 1500 containers, check if all the screws and fasteners are fastened.
If loose, please fasten again.
3). After 1000 hours' operation or lifting 15000 containers, all the lubricating parts should be lubricated.
4). After 1500 hours' operation or lifting 25000 containers, the twist lock structure should be checked.
a). Disassemble all the four twist lock structures.
b). If any problem, please replaced accordingly.
c). Washing all the parts.
d). Install the four twist lock structures.
5). After 3000 hours' operation or lifting 50000 containers, the twist lock structure should be checked, if
there are cracks or other faults, please replace timely.
6). After 6000 hours' operation or lifting 100000 containers, please replace the twist lock structure.
FAQ
Before you send us an inquiry about container spreader, please let us know some information as following:
1:What is lifting capacity of spreader?
What is type of spreader? Semi automatic container spreader, New I type spreader, motor spreader, hydraulic rotating container spreader, hydraulic telescopic spreader or electro telescopic spreader?
2:If what you need is telescopic spreader, please confirm it is hydraulic telescopic or electric telescopic?
3:What is the using temperature of spreader?
4:Will you match a rotator with the telescopic spreader?
Our other container spreader
Audited Supplier 
){kind=link}