| Customization: | Available |
|---|---|
| After-sales Service: | Remote Technical Support 1year After-Sales Service |
| Warranty: | Long-Term Local After-Sales Service |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Name of drawing | Approval Drawing | Working Drawing | Final Drawing | Remarks |
| 1 | Instruction | YES | YES | YES | |
| 2 | Test program | YES | YES | YES | |
| 3 | G.A | YES | YES | YES | |
| 4 | Hydraulic system diagram | YES | YES | YES | |
| 5 | Electric circuit diagram | YES | YES | YES | |
| 6 | Overall of electric control box | YES | YES | YES | |
| 7 | Spare parts list | YES | YES | YES | |
| 8 | Factory Test report | YES | |||
| 9 | Factory certification | YES | |||
| 10 | Class certification (LR) | YES |
Technical Agreement
| Basic technical specification | Classification Society: | BV | Motor insulation class | F |
| Navigation: | unrestricted | Motor protection class | IP56 | |
| Painting | Surface disposal | short blast to Sa 2.5 | Motor with cable gland | With |
| Primer paint | 702 zinc epoxy prime 80μ(dry) | Motor with earth bolt | With | |
| Finish paint | To be determined follow the ship owner later | Motor with space heater | With | |
| Certificates required | Marine products certificate by class Manufacture certificate | Motor starting method | Y/△ start | |
| Standard | ISO; GB; CB | Motor in compliance with IEC requirement | Yes IEC | |
| Temperature of environment | -10ºC---+50ºC | Spare parts | Spare part list in box | |
| Recommended lubrication oil type for the equipment: | Import | |||
| Power source | AC 440 V ; 60 Hz; 3 Φ; DC V | |||
| Rule and Regulation: | BV | |||
| SWL | 2t | Elec-Motor | YB160M-4-H | |
| Max. working radius | 8.5m | Power | 11kW | |
| Min. working radius | 2m | Speed | 1760r/min | |
| Hoisting speed | 7m/min ~12m/min() | Power Resource | AC440V/60HZ | |
| Hoisting height | 20m | Start Way | Y/△ | |
| Slewing speed | ~0.5r/min | Protect Grade | IP56 | |
| Slewing angle | 360° | Insulation Grade | F | |
| Luffing time | ~50s | |||
| Working condition | Trim | ≤20 | ||
| Heel | ≤50 | |||
| No. | name | Qty. |
| 1 | Boom | 1/ 1 set |
| 2 | operation platform | 1/ 1 set |
| 3 | Hoisting winch | 1/ 1 set |
| 4 | Pedestal | 1/ 1 set |
| 5 | Luffing cylinder | 1/ 1sets |
| 6 | Maintenance platform | 1/ 1 set |
| 7 | Hook | 1/ 1 unit |
| 8 | Steel wire rope | 1/ 1 unit |
| 9 | Oil tank | 1/ 1 set |
| 10 | Pump unit | 1/ 1 unit |
| 11 | Electrical control box | 1/ 1 set |
| No. | name | Qty |
| 1 | High pressure tube | 3/ 3 pcs |
| 2 | Joint | 3/ 3pcs |
| 3 | Seal | 3/ 3pcs |
| 4 | Washer | 10/ 10pcs |
| 5 | "O" O-ring | 10/ 10pcs |
| 6 | Fuse | 3/ 3pcs |
| 7 | Oil Cup | 5/ 5pcs |
Q1: What information should I provide when inquiring?
A: Thanks for your question. The more information you provide, the more accurate the solution we can prepare for you! We would appreciate information such as the lift capacity, span, height, power source, or other specials you give us.
Q2: Is your products customized?
A: Because of different working conditions, all our products are customized depending on the required details! So, if you give us more information about the lift capacity, span, lift height, power source, and other specials, we will provide you with a rapid quote!
Q3: How can we install the crane?
A: Our senior engineer can be on your side to provide the installation guide service and training.
Q4: Can you provide the serious lifting tools?
A: Sure, we can provide any lift tools you require, such as a lift sling belt, lift clamp, grab, magnet, or other specials!
Q5: How about your payment terms?
A: We accept T/T and L/C at sight.
){kind=link}