| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Operation Form: | Cabin |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The 20-foot/40-foot double lane container tipping machine
The container tilter is built around a fully welded steel chassis, primarily from 305 x 305 x 137 kg beams.
The lifting arms are fabricated using 305 x 305 x 137 Kg beams, plated with a 15mm steel plate to give an ultra-high strength lifting frame.
The pivot point is further reinforced with 15 mm plates, which are bushed to accept the 50mm main pins.
Actuated by 4 No 100 x 60 mm hydraulic cylinders from -10 degrees (to allow for different trailer heights) up to 90 degrees. Fitted with fail-safe check valves.
Hydraulically activated arms act as supports for the container doors as well as closing them prior to tilting the container from an upright to a horizontal position. With the doors held firmly, the doors can be latched safely from ground level.
Hydraulics are powered by a 30-litre-per-minute geared pump. With a 100-liter capacity reservoir fitted with filtration. And the hydraulic system has PRV protection.
The unit comes complete with a radio-controlled pendant remote unit, so the unit can be operated from the most
advantageous and safe position. Manual override controls are also located on the machine as a backup system.
The complete unit would be mounted onto 4 No Applied Weighing 'Safe Mount' 20,000 kg capacity compression load cells so that the container can be weighed in any position. The weight would be displayed via a LCD digital display for easy reading.
The unit is completely self contained and driven from 3 cylinder 20 HP Diesel engine.
Application:
Our Main Product
CUSTOMER VISITSING
){kind=link}