ISO new type semi-automatic container spreader without power
This container spreader is equipped with a 40T gantry crane to load and unload containers. The spreader is light, has no power, is easy to operate, and is cheap. There are two kinds of spreaders 32t-20' and 40t-40'.
Operation: first put the four main lifting ropes riggings of the spreaders and one turning stretch wire rope in the hook of the gantry crane. Before lifting, the guide points to the open direction. By the localizers at the four sides of the spreader and the skilled operation, the four turning locks of the spreader are locked into the corner, and then the hook is started slowly. The stretch wire rope is firstly tight to pull the turning mechanism and turn the turning lock in 90°and be closed, and then keep lifting the hook. The container is lifted.
Lay container down: After hanging containers to be scheduled position, keep the hook fall about 1-2m and then lift the hook again. Before the main lifting wire rope is dragged, lift the turning rope to make the turning lock back to the open position and lift the hook to depart the spreader and container. By now the operation is finished.
Maintenance: The link pole of the spreader and turning mechanism should be opened to check regularly and add lubricating oil to make every part turn fluently. If there are obvious damages and distortion, the spreader and wire rope should stop work at once.
| Type |
SWL |
Dead Weight |
| 20feet Container spreader |
25-35T |
1.2-2.6T |
| 40feet Container spreader |
32-45T |
3.9t-4.8t |
Audited Supplier 
){kind=link}