20/40/45 feet full-Automatic telescopic Electrical Hydraulic Container Spreader
Product description:
Automatic container spreader
Automatic container spreader. It includes 4 steel wire ropes, which have rigging rings at the end of the steel wire ropes.
The ends that connect with the crane have a concentrated ring.
The spreader is equipped on 40t gantry crane to load and unload containers. The spreader is light, no power, easy to operate and cheap. There are two kinds of spreader 32t-20' and 40t-40'.
Fully automatic container spreaders can be divided into electric - hydraulic telescopic spreaders and electric - hydraulic rotary telescopic spreaders.
Hydrauic telescopic container spreader
Hydraulic telescopic spreader is specially designed for quayside container brige crane and rail gantry cranes,
The lifting spreader is suitable to both ISO 20 feet and 40 feet containers and its lifting capacity is 40T.
Container spreader is driven by hydraulic system. Its automatic working provides high efficiency, especially for large container loading and unloading yard.
Tpye |
Dead weight |
SWL |
Source |
Suitable container |
20feet Motor drive container spreader |
9T |
40T |
380V/3P/60Hz |
20/40/45ft |
Hydraulic Rotating Container Spreader
Hydraulic rotating container spreaders can be used with gantry crane, bridge crane, floating crane and gate crane.
The crane spreader is suitable to both ISO 20ft and 40ft containers and its lifting capacity is 45T.
The spreader is driven by hydraulic system.
Its automatic working provides high efficiency, especially for large container loading and unloading yard.
Tpye |
Dead weight |
SWL |
Source |
Suitable container |
20feet Motor drive container spreader |
8.8T |
45T |
440V/3P/50Hz |
20/40ft |
Painting
Surface Treatment & Painting
1. Flame dirt-remover, and then shot blasting.
2. Primer coating (Epoxy resin paint) app. 40µm
Middle (Epoxy resin paint) app. 80µm
Top paint (Polyurethane paint) app. 40µm.
Parts Introduction
1. Lever For Operating Rope
2. 20'&40'Heavy Duty Container Spreaders
3. Semi-Automatic or Manual Operation
4. Extra Large Lifting Rings 180*340mm 180*340mm
5. Actuation Spring
6. Spring Support
7. Operating Handle
8. Twist lock
9. Actuation Gear For Semi-Automatic Operation
Spreader Characteristics
1.The spreader adopts box-type end beam, so the structure is stable.
The twist lock is leak proof structure, which protects the parts from rusting
2. Four hoist points structure, which lighten the dead weight of the spreader, and enhance the stability of the spreader.
3HS20'/ HS40' spreader adopt Heavy hammer type semi-automatic twist lock,manpower to turn the pin is no need any more, which highly improve the work efficiency and safety on spot.
Safety Test
1. Each spreader should be carried out 150% static load test before delivering.
2. All the lifting eyes should be carried out safety test.
3. Each twist lock should be carried out 25t safety test.
Safety Protection
1.When the spreader lifts container, the load should not exceed the max. SWL.
2.When using the spreader, using design function only.
3. Person shouldn't stand under the lifting spreader.
4. After operation, please check if there are damages on the spreader, if fasteners loose. If so, please repair timely.